![]() ![]() Then, release it when you hear three short beeps. From a powered off state, press and hold the power button for about two seconds.The power button can be used to recover if you encounter Fast Boot problems. If the boot attempt fails after POST, no message displays, and Fast Boot is still active. Would you like to restore Fast Boot on the next boot? (Y/N). When the computer is booted, if the previous boot failed during POST, Fast Boot is disabled and the following message displays: The BIOS detects if previous boot was unsuccessful. This doesn't affect video capabilities after the operating system boots.įast Boot recovery in Intel Visual BIOS 1.x If disabled, the BIOS displays the logo and boots slower. If you enable Video Optimization, the BIOS displays text only and not a custom logo. The USB optimization feature will be disabled for the first boot after restoring power to the system. Unplug the computer to temporarily disable this feature. CautionĮnabling this feature prevents you from using a USB keyboard to enter BIOS setup. USB Optimization can't be enabled if a User Password or Hard Drive Password is installed. If you enable USB Optimization, all USB devices will be unavailable until after the operating system boots but the system will boot faster. If you enable General Optimization, the system boots faster because the following features are disabled: Enable any, or all, of the three Fast Boot options:.Go to the Advanced menu > Boot > Boot Configuration tab.įast Boot recovery in Intel Visual BIOS 2.x If the previous boot failed during POST:Įnable Fast Boot in Intel Visual BIOS 1.x.(This option appears in the menu only when Fast Boot is enabled.)Įnable Fast Boot in Intel Visual BIOS 2.x Then, release it before the 4-second shutdown override. Press the power button and hold it down for three seconds.Make sure the system is off, and not in Hibernate (S4) or Sleep (S3) mode.Access the power button menu with this sequence: No message displays, and Fast Boot is still active.ĭisable Fast Boot from the power button menuYou can use the power button to recover if you encounter Fast Boot problems.Fast Boot is automatically disabled in the next boot and this message is displayed: The previous boot attempt failed.Press F2 during boot to enter the BIOS setup.įast Boot recovery in Intel Visual BIOS 3.x If the previous boot failed during POST:.Included with first generation Intel NUCs:Ĭlick or the topic for details: Enable Fast Boot in Intel Visual BIOS 3.x Included with all other Intel NUC models except first generation Intel NUCs (listed below). ![]() Included with the following Intel NUCs only: See the table to find out which Intel Visual BIOS is supported on your Intel NUC. ![]() The steps to enable and recover Fast Boot depend on the version of the Intel Visual BIOS on the Intel NUC. ![]() You can't boot to an optical drive or USB drive to install an operating system.You can't access BIOS Setup during boot with the F2 key.When Fast Boot is enabled, these problems can occur: Video and USB devices (keyboard, mouse, drives) won't be available until the operating system loads.Boot from Network, Optical, and Removable Devices are disabled.Last but not least, it has been known to render Wake-On-Lan unusable this is the problem I'm currently facing after an upgrade to Windows 10 of several Windows 7 PCs which used to WOL quite fine, and now just don't anymore.įor these and other reasons, I'd like to be able to manage Fast Startup using Group Policies however, the only policy I could find about this ( Computer Configuration\Policies\Administrative Templates\System\Shutdown\Require use of fast startup) can only be used to force the use of Fast Startup, but not to disable it: its description explicitly states that if you disable or do not configure this policy setting, the local setting is used.Fast Boot is a feature in BIOS that reduces your computer boot time.It does hell to the processing of some group policies, which require an actual system restart in order to be applied.and good luck if you are also using mirrored dynamic disks, which will always undergo a full resync after a system crash). It can seriously screw up on some systems (possibly when using old/incompatible drivers or BIOSes), resulting in a system crash at boot time and a subsequent forced full boot (this I witnessed personally on several different systems.Windows 8 / 8.1 / 10 has this feature called "Fast Startup" (or "fast boot", "hybrid statup", "hybrid shutdown", and so on.) which doesn't actually shut down the computer when you tell it to do so, instead putting it in a sort of hybernation, in order to speed up boot time.Īlthough this might seem nice at first view, it has several known and ugly side effects: ![]()
0 Comments
Leave a Reply. |